Maintaining a home isn’t as cheap as we all want it to be. Apart from the engaging, Kiasu Plumber , on an ad-hoc basis, maintaining it for a long time also entails a lot of hard work and money. You have to be vigilant in check the integrity of your houses and every area of it. Otherwise, you would be spending a lot more and being inconvenienced further if you allow any form of damage to grow. One way to cut down on costs is to install plumbing fixtures that help you save water. These fixtures prevent water from being wasted needlessly. Here are some of them folks.
It’s easy to get your head lost when you’re in a shower. This is true, especially after a long and hard day at work. Since you’re more focused on taking a relaxing bath, you don’t notice the amount of water you’re using. In fact, conventional showerheads release an average 2.5 gallons per minute. Now that’s a lot of water, considering you’ve been in the shower for at least 10 minutes. If you want to cut that figure down, it would be best to use a performance showerhead. Unlike the conventional ones, this showerhead only releases 1.75 gallons per minute. As a result, you get to save more water and money while taking a bath.
Water Heaters with a Re-Circulating System
Since we’ve tackled a relaxing shower, nothing beats having a warm bath. That’s made possible with the help of water heater. At the same time, the usage of this device also spends a lot of water for your purposes. That’s because when you turn on your heater and faucet, cold water will come out at first. It’ll take a short moment before the water comes out at a temperature you want. The initial flow of water will be wasted. To remedy that, you need to install a re-circulating water heater system so there’s always a supply of hot water whenever you start taking a bath. This measure stores hot water when it operates so there’s not a drop of it that will be wasted.
A house’s main water line is responsible for supplying this basic commodity to the different areas of your residence. At the same time, if there’s too much pressure being used to transport water to these areas, you’ll lose more of this important resource. For some homes, the pressure being used is around 70psi. If you want to fix that problem, installing pressure-reducing valves is your best bet. These tools bring down the pressure in your main water line. As a result, the flow of water in your faucets and showerheads will be just be normal and enough. Anything that’s stronger would only result to a waste in water.
If you must know, toilets are one of the biggest reasons why your water bill is so high. That’s because with every flush of your waste, around 3.5 gallons of water is used to drain them away. Now, multiply that with the number of times you use your toilet each day and you’ll see how much water you have used. A good way to solve this predicament is to use water-efficient toilets. These bathroom fixtures only use around 1.3 gallons of water every time you flush your toilet. That’s a far cry from the average figures and will be a big help for you and the environment.
You might also want to check out some great reasons why you should have an air conditioning unit installed at your house.